صفحه اصلی - شرکت برازنده تجارت هونام قشم - وارد کننده تجهیزات بازرسی

پراب ضخامت سنج الکومتر 456 ELCOMETER



Want create site? Find Free WordPress Themes and plugins.

پراب ضخامت سنج الکومتر

مشخصات فنی:

پراب مینیاتوری Mini Probe

پراب مستقیم Straight Probe

پراب اولترا اسکن Ultra/Scan Probe

پراب زاویه ای Right Angle Probe

پراب ضد آب Waterproof Probe

پراب تلوسکوپ Telescopic Probe

همچنین این شرکت دارای تجهیزات جانبی چسب ایزو و ASTM ، تیغه دستگاه خراش انداز 107، صافی سنج الکومتر 224 می باشد.


پراب ضخامت سنج

lcometer 456 Coating Thickness Gauge Probe Range

All Elcometer 456 coating thickness gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.

Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.

Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.


Elcometer 456 Coating Thickness Gauge Probe Range Explained


456 straight probe

Straight Probes

Measure coating thickness on both flat and curved surfaces

456 mini

Mini Probes

Ideal for measuring coating thickness on edges, narrow pipes or small surface areas

456 right angle probe

Right Angle Probes

Designed for taking coating thickness readings where access is restricted


PINIP™ Probes

Plug-in probes convert a separate coating thickness gauge into an integral gauge

456 telescopic probe

Telescopic ProbesExtending right angle probes for out of reach areas

456 ultra scan

Ultra/Scan ProbesThese probes are fitted with replaceable probe caps – allowing users to take individual coating thickness measurements or scan large surface areas without damaging the probe

456 waterproof

Waterproof Probes

Sealed for use underwater at depth, even in diving gloves

456 High Temp

High Temperature Probes

For use on hot coated materials up to 250°C (480°F)

456 anodiser

Anodiser Probes

Chemical resistant washable probes – ideal for the anodising environment

456 arnoured probe

Armoured Probes

Probes with metal reinforced heavy duty cables, reducing the risk of cable damage

456 soft coatings

Soft Coating Probes

Large surface area probes for soft reach materials (HVCA approved)

456 specialist

Specialist Probes

These probes are designed for measuring coating thickness on specialist substrates, such as graphite, or electroplated components

Elcometer probes have a maximum operating temperature of 80°C (176°F) with the exception of separate ferrous probes 150°C (300°F) and Hi-Temperature PINIP’s 250°C (480°F). The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

All Elcometer coating thickness gauge probes are supplied with a Test Certificate and a set of calibration foilsappropriate to the scale range of the probe.

Elcometer 456 Coating Thickness Gauge Probes
Elcometer 456 Coating Thickness Gauge ProbesElcometer 456 Coating Thickness Gauge Probes Elcometer 456 Coating Thickness Gauge Probes
Did you find apk for android? You can find new Free Android Games and apps.

نقد و بررسی‌ها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین کسی باشید که دیدگاهی می نویسد “پراب ضخامت سنج الکومتر 456 ELCOMETER”

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

آدرس : تهران ، خ :کارگر شمالی ، بالا تر از پمپ بنزین ، خ چهارم ، پلاک 4 ، واحد 9

E-Mail :







  • 77
  • 144
  • 1,238
  • 3,860