کامل محصول
جهت خرید گیج جوشکاری hilo تکی در زیر از ویژگی های آن اطلاع حاصل نمایید :
** خرید گیج جوشکاری با قیمت مناسب از فروشگاه تجهیزات بازرسی برازنده تجارت **
کاتالوگ گیج جوشکاری Hi-Lo تکی Single Hi-Lo | گیج جوشکاری Hi-Lo را از فایل زیر دریافت نمایید:
The Hi-Lo Welding Gauge is a multipurpose and versatile gauge. As with many of our gauges, both Inch & Metric units of measurement are available directly on the gauge for dimensional verification.
With the Hi-Lo Gauge, you can measure:
* Internal misalignment after fit up
* Material thickness after fit up
* Verify 37-1/2 degree bevel angle
* Fit-up gap after fit-up
* Fillet weld leg length
* Butt weld reinforcement
We’ll start with an internal misalignment measurement.
First loosen the locking screw and insert the gauge tip into the fit up gap.
Now rotate the gauge 90 degrees and slide the gauge body until it comes in contact with the outside diameter of the pipe. This verifies that the gauge is square and the reading is correct.
Next, pull down the gauge until the internal alignment stops are snug against the inside of the pipes.
Read the misalignment on the scale. This misalignment measures 3/32 of one inch.
You can use the same procedure to measure pipe wall thickness after fit up.
آزمایشگاه پایه جوش
بازررسی چشمی VT
بازررسی رنگ و پوشش
تجهیزات معاینه فنیCNG
تجهیزات مایعاتPTMT
تجهیزات رادیو گرافیRT
دستگاه التراسونیک
ابزار دقیق تست الکتریکی و برق
تجهیزات ابزار دقیق شرایط محیطی
تجهیزات و دستگاه بازرسی بتن
دستگاه بازرسی فیزیکی
تجهیزات ابزار دقیق شیمیایی
بازرسی خطوط لوله